| CHANGXIN TOOLS- SPADE BITS (WOOD FLAT DRILL BITS): |
 |
 |
 |
| NORMAL SPADE BIT Good for cutting wood and chipboard. |
TRI-POINT SPADE BIT Good for cutting wood and chipboard with smooth hole. |
SPADE BIT WITH CURVED CUTTER Esp.good for cutting smooth hole. |
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TRI-POINT SPADE BIT WITH
CROSS CUTTER Good for cutting wood and chipboard with smooth hole. Cross cutter design makes cutting easily | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
| SHORT TYPE SPADE BIT Good for cutting sheet wood and plywood. |
EXTRA LONG TYPE SPADE BIT |
|
|
Introduction
How do you bore a big hole? Use a spade bit to make a hole larger than you can with a regular drill bit. Here's how.
Instructions
Difficulty: Moderately Easy
Steps
1. Step One
Identify a spade bit by its shape: it looks a little like a flat shovel with a point in the center of the end.
2. Step Two
Make a pilot hole first with a regular 1/8-inch bit at the center of where your hole will be.
3. Step Three
Line the point of the spade bit up with the pilot hole.
4. Step Four
Start the drill motor at a slow speed and hold it steady as the bit grabs the wood.
5. Step Five
Increase the drill speed steadily.